Lowering spring
-
- Newbie
- Posts: 8
- Joined: Tue May 17, 2011 12:24 am
- Location: Devon
Lowering spring
does any body know where i can find a set of lowering for the 200 i can find the petrol ones but not the diesel i would like the extra low ones they do for the petrol model
Re: Lowering spring
How low do you want to go?
ZR diesel standard ones will drop the car a little.
Xpower ones will drop it even more.
ZR diesel standard ones will drop the car a little.
Xpower ones will drop it even more.
-
- Newbie
- Posts: 8
- Joined: Tue May 17, 2011 12:24 am
- Location: Devon
Re: Lowering spring
ideally i would like to take it down 60mm front 70mm back with my last one i had i cut the springs to about this and it looked really nice but this time im going to to it properly lol
Re: Lowering spring
If you have a specific drop in mind then some custom made springs may be the best bet. These are usually cheaper than you think!
That does seem awful low though.
The ZR springs drop the car 20-25mm over a 200 suspension setup. I think they sell -30mm springs for the ZR but not much more.
That does seem awful low though.
The ZR springs drop the car 20-25mm over a 200 suspension setup. I think they sell -30mm springs for the ZR but not much more.
-
- Newbie
- Posts: 8
- Joined: Tue May 17, 2011 12:24 am
- Location: Devon
Re: Lowering spring
The ZR Set Up Sounds Better.
Do you Know Any where I can Order Custom Spring from online??
Do you Know Any where I can Order Custom Spring from online??
Re: Lowering spring
http://www.dfaulknersprings.com/
I've never dealt with them but they've been around a fair while. They should be able to make up something to your needs if you don't want the ZR springset.
I've never dealt with them but they've been around a fair while. They should be able to make up something to your needs if you don't want the ZR springset.
-
- Spanner Twirler
- Posts: 498
- Joined: Wed Apr 10, 2024 12:04 am
Best Product Guide
Please try Google before asking about Cool Product Info 2ce4235