adjusting boost MG ZT-T

Post Reply
Bolt Twiddler
Posts: 23
Joined: Mon Apr 05, 2010 10:31 am

adjusting boost MG ZT-T

Post by paulr600sdi »

Do the same differences apply if i wanted more boost ( on my zt ) as it does when shortening the actuator arm on the older l-series engine? If so would I be looking at the pushing for the same psi ( 19 ) or is it a completely different story?
If i'm not back in five minutes...... Just wait longer!

(Jim Carey, Ace Ventura)
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Re: adjusting boost MG ZT-T

Post by E_T_V »

So long as there isn't a boost control valve used (and I don't think there is), then yes shortening the actuator will increase the boost level.

I have to say I've no idea on what boost level the BMW engine can take though (The original turbo is very small from memory).
Post Reply