Lowering spring

Post Reply
stonehouse89
Newbie
Posts: 8
Joined: Tue May 17, 2011 12:24 am
Location: Devon

Lowering spring

Post by stonehouse89 »

does any body know where i can find a set of lowering for the 200 i can find the petrol ones but not the diesel i would like the extra low ones they do for the petrol model
E_T_V
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Re: Lowering spring

Post by E_T_V »

How low do you want to go?

ZR diesel standard ones will drop the car a little.

Xpower ones will drop it even more.
stonehouse89
Newbie
Posts: 8
Joined: Tue May 17, 2011 12:24 am
Location: Devon

Re: Lowering spring

Post by stonehouse89 »

ideally i would like to take it down 60mm front 70mm back with my last one i had i cut the springs to about this and it looked really nice but this time im going to to it properly lol
E_T_V
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Re: Lowering spring

Post by E_T_V »

If you have a specific drop in mind then some custom made springs may be the best bet. These are usually cheaper than you think!

That does seem awful low though.

The ZR springs drop the car 20-25mm over a 200 suspension setup. I think they sell -30mm springs for the ZR but not much more.
stonehouse89
Newbie
Posts: 8
Joined: Tue May 17, 2011 12:24 am
Location: Devon

Re: Lowering spring

Post by stonehouse89 »

The ZR Set Up Sounds Better.
Do you Know Any where I can Order Custom Spring from online??
E_T_V
Site Admin
Posts: 439
Joined: Thu Jan 29, 2009 9:38 pm

Re: Lowering spring

Post by E_T_V »

http://www.dfaulknersprings.com/

I've never dealt with them but they've been around a fair while. They should be able to make up something to your needs if you don't want the ZR springset.
Post Reply