Search found 23 matches

by paulr600sdi
Fri Mar 21, 2014 8:40 pm
Forum: Turbo
Topic: adjusting boost MG ZT-T
Replies: 1
Views: 7514

adjusting boost MG ZT-T

Do the same differences apply if i wanted more boost ( on my zt ) as it does when shortening the actuator arm on the older l-series engine? If so would I be looking at the pushing for the same psi ( 19 ) or is it a completely different story?
by paulr600sdi
Thu Mar 20, 2014 9:08 am
Forum: Clutch and Gearbox
Topic: MG ZT-T, got no clutch
Replies: 2
Views: 4928

Re: MG ZT-T, got no clutch

Nice one E_T_V, gonna be gettin it checked out but for now its still goin good. No signs dots of oil on ground but could be losing it as I'm driving it!
by paulr600sdi
Tue Mar 18, 2014 9:25 pm
Forum: Clutch and Gearbox
Topic: MG ZT-T, got no clutch
Replies: 2
Views: 4928

MG ZT-T, got no clutch

Hi all, bought an MG ZT-T cdti 135+ a few days ago now and after driving it for a bit I realised it was getting harder to select gears in any order. A friend of mine mentioned that it was a common fault on the 75 and in formed me of the location of the clutch fluid filler cap. Then this morning to n...
by paulr600sdi
Sat Mar 15, 2014 1:05 am
Forum: Introductions
Topic: hello again!
Replies: 0
Views: 6431

hello again!

Its been a while but i'm back in a rover! Whoop whoop! I've been on the hunt and got myself a MG ZT-T 135+ cdti Lovely car facelift model, but sadly not looked after by previous owner/s few problems! so stand by as I try to sort them! so hello again and im sure you'll help me through the problems li...
by paulr600sdi
Mon May 02, 2011 4:35 pm
Forum: Engine
Topic: intercooler
Replies: 2
Views: 3568

Re: intercooler

sorry i took a while but not on the internet at mine, but cheers E_T_V, i'll be havin a go soon! i'll let you know how i get on!
by paulr600sdi
Mon Apr 11, 2011 12:42 pm
Forum: Engine
Topic: intercooler
Replies: 2
Views: 3568

intercooler

hi all, bin a while, the 600 has gone and i've now got a 220D, i'm looking at fitting a intercooler to it but need to know if its an easy or hard job?? can't be that hard! can it?
by paulr600sdi
Mon Jun 14, 2010 9:30 am
Forum: Engine
Topic: anyone got an oil pump for sale??
Replies: 9
Views: 7035

Re: anyone got an oil pump for sale??

all done, drove car for just over an hour and belt was fine.

fitted the 800ti alloys and has totally changed the look and handling of the old girl!!
by paulr600sdi
Thu Jun 10, 2010 11:52 am
Forum: Engine
Topic: anyone got an oil pump for sale??
Replies: 9
Views: 7035

cam belt

Oil pump sorted! But havin probs with cam belt, when re-fitting the cam belt it was tensioned, took it for a spin and everything was fine. I checked for leaks and there wasn't any ( thank god!) i then noticed that the belt had loosened. Not a great deal but enough to cause concern! Everything was re...
by paulr600sdi
Sat May 29, 2010 2:29 pm
Forum: Engine
Topic: anyone got an oil pump for sale??
Replies: 9
Views: 7035

Re: anyone got an oil pump for sale??

got an oil pump off fleabay £23!! one problem tho! it had a tempature sensor and it was fouling against an oil pipe, so put a blank in it! it only got overtightened and f*@#%ng cracked it !!!!!!!!!! so the cemical metal has come out! aint had time to re-fit to see if it has worked, even if it works ...
by paulr600sdi
Thu May 20, 2010 10:26 pm
Forum: Engine
Topic: Removal of the bottom pulley????
Replies: 5
Views: 4636

Re: Removal of the bottom pulley????

cheers for the info mate will continue tomoz! bit dark now! managed to source a second hand pump for bout £30